A collection of my small experiments, personal instructions, 3D-printing projects and programming notes. Some projects were created mainly for learning and personal use.
Clickable:
RP2040-One Injector
An HID injector is a device that is recognized by the system as a standard keyboard or mouse (HID device) and can send programmed keystrokes to the target computer.
What you will need:
Download circuitPython for rp2040-one
Download adafruit hid for circuitPython(For your version of circuitPython)
Installation steps:
- Enter the bootloader: Hold BOOT on the board and insert it into the computer, a board will appear in the form of an RPI-RP2 flash drive
- Upload firmware: Transfer the downloaded .uf2 file to the board. The board should reboot itself and appear as a CIRCUITPY disk (If it does not appear, remove and insert the board into the PC yourself)
- Place HID libraries: Create a lib folder on the CIRCUITPY disk. Copy the adafruit_hid folder into lib, which is located in the downloaded adafruit. This is what the folder looks like:

4. Download the file with the code from the link to GitHub (Download zip), unpack the zip, paste code.py with replacement in CIRCUITPY (Python must be downloaded):
link (Click)
5. Create a text file called payload in CIRCUITPY, where we will upload ducky 1.0 scripts. It should be like this

(I created the payloads folder myself for my scripts)
6. First script, download the text file, copy the script from the text file to payload.txt:
The script creates a snake game on a PC, Python must be installed and Internet access. Arrow control
The script creates a ping pong game on a PC via HTML. Much longer than python, but allows you to run without python and without the Internet. Control WASD and Arrow keys when there are two players. WASD When one player. R-restart button. G button - change mode to play with a PC or two people.
The script creates a snake game on a PC via HTML, longer than python, but allows you to run it without python and without the Internet, controlled by arrows.
Mouse on board Bambu lab mouse kit 002


I modeled it in Maya, the task was to make a comfortable, lightweight, cheap mouse that would be on par with expensive segments.
I used wlmouse YING as an example form because it is the best for me.
The open body helps reduce plastic costs and reduce the weight of the mouse.
What is the advantage of being light weight? The answer is banal, easier handling + faster movement. The weight of the mouse can be different for each user.
During the creation process, it was necessary to take into account the pros and cons of plastic. Using bambu lab PLA matte as an example, this is its low price, but also its fragility. That is, you cannot make small parts.
What happened:




I also soldered new switches, but this is not necessary.
There is also a removable part for the wrist so that you can make it comfortable for any hand:

Total price:
- Price Bambu lab mouse 002 - 268 r
- AA battery 1pc - 50r
- Plastic for printing (Any, in my case Bambu lab PLA matte) - 21 grams - 31 rub.
- Glides (stickers for sliding) - 6 pieces - 100 rubles Result: 450 rubles for a full mouse.

Total weight: 30g
By the way, the printing was done on a Bambu lab x1 carbon printer.
You can download the stl file from the github link:
IntelFelix/Ez-Mouse-Bambu-lab-mouse: Felix Babmu lab mouse kit 002
Update:
I made a case to fit my hand by scanning its cast on my phone using the KIRI Engine app:

AI bot in telegram
I made an AI webhook for a telegram bot based on gpt 5 mini.
I made a prompt for him for normal communication, similar to me.
the logo was painted in Krita

case for raspberry pi 5


printed with pla matte plastic on a bambu lab x1 carbon printer
What you will need:
train FPC WaveShare (15 and 22 pins)
screw m2.5×14